![Dynamic Weight Control and Metal Detection for Fruit & Mushroom Clamshell Packaging in the Netherlands [1] - Antares Vision Group](http://antaresvisiongroup.b-cdn.net/food/wp-content/uploads/sites/2/2026/11/01_Cover_Use_Case_clamshell_rev01.jpg)
Dynamic Weight Control and Metal Detection for Fruit & Mushroom Clamshell Packaging in the Netherlands
How Antares Vision Group engineered a two-step checkweighing and metal detection process for a leading Dutch berry-packaging OEM’s four-lane clamshell line, built to withstand a high-variability product and a wet environment.
| Country Netherlands | Industry Food | Product Fruit and mushroom punnets (clamshells) |
| Formats 5 formats | Dimensions H 20–140mm · Leading side 40–200mm · L 40–280mm | Lanes 4-lane parallel line |
The Challenge: Weight Accuracy and Product Safety in a Wet Environment, with high-variability products
This Dutch OEM is a global leader in berry packaging lines. Its lines face a well-known challenge: high natural product variability in fruit and mushroom clamshells, where a single strawberry more or less can easily push a package out of weight tolerance.
The OEM needed an advanced solution able to:
- Dynamically build each package within weight tolerance despite natural product variation
- Check every pack individually, one by one
- Eliminate any risk of metal contamination in the finished pack
All of this had to be integrated into a four-lane parallel line, running across 5 different clamshell formats (heights from 20mm to 140mm, leading side from 40mm to 200mm, length from 40mm to 280mm), inside a wet environment characterized by constant product spillage and frequent washdown cycles.
The ANTARES VISION GROUP Solution: A Two-Step Checkweighing and Metal Detection Process
Antares Vision Group supplied 4 SR-1200 checkweighers with a Heavy Duty frame kit for open-clamshell weight control, plus 4 SR-1200/MDCC combined checkweigher and metal detector units for final inspection on closed packages — one set per lane.
![Dynamic Weight Control and Metal Detection for Fruit & Mushroom Clamshell Packaging in the Netherlands [2] - Antares Vision Group](http://antaresvisiongroup.b-cdn.net/food/wp-content/uploads/sites/2/2026/11/02_Clamshell-970x483.jpg)
Step 1 — Open-clamshell weight control
Before sealing, open clamshells undergo an initial weight check. Integrated with the OEM’s proprietary dividers, the system instantly separates correctly filled packs from under- and overfilled ones. Operators manually rebalance product from overfilled to underfilled packs, then reintroduce the corrected clamshells into the inspection line — minimizing giveaway right from the start of the process.
Step 2 — Closed-clamshell final inspection
Positioned directly after the flowpack machine, a combined checkweigher and metal detector performs a MID-approved check of the exact weight of each sealed pack and scans for metal contaminants, providing a full compliance guarantee on every unit leaving the line.
![Dynamic Weight Control and Metal Detection for Fruit & Mushroom Clamshell Packaging in the Netherlands [3] - Antares Vision Group](http://antaresvisiongroup.b-cdn.net/food/wp-content/uploads/sites/2/2026/11/03_Clamshell-970x604.jpg)
![Dynamic Weight Control and Metal Detection for Fruit & Mushroom Clamshell Packaging in the Netherlands [4] - Antares Vision Group](http://antaresvisiongroup.b-cdn.net/food/wp-content/uploads/sites/2/2026/11/04_Clamshell-1.png)
Why ANTARES VISION GROUP Stood out: Engineering to Fit a Demanding, Real-World Line
A solution designed around the OEM’s actual process
ANTARES VISION GROUP engineered the two-step process specifically to match how this OEM’s clamshell lines actually operate — including direct integration with the OEM’s proprietary divider systems.
Built for a wet, high-throughput environment
The Heavy Duty frame kit was specifically engineered to withstand constant product spillage and frequent washdown cycles, without compromising measurement accuracy or uptime.
Hygienic design and ease of use as differentiators
Key success factors also included the hygienic design and the user-friendly human-machine interface— both important considerations in a washdown-intensive fresh food packaging environment.
Results & Business Impact
- Ensured compliance with net weight legislation across 5 clamshell formats on a 4-lane line
- Optimized production by avoiding costly product giveaway through early-stage rebalancing
- Guaranteed the absence of metal contaminants as required by food safety guidelines
- Delivered a full compliance guarantee at the point of final, sealed-pack inspection
Frequently Asked Questions
Fruit and mushroom clamshells have high natural product variability, where a single piece more or less can push a pack out of weight tolerance. Checking open clamshells before sealing allows correction of over- and underfilled packs, while a second check after sealing provides a final compliance guarantee on the finished pack.
MID (Measuring Instruments Directive) approval certifies that a checkweigher’s measurements meet the legal metrology requirements for verifying the net weight of pre-packaged goods, supporting compliance with net weight legislation.
Metal detection on the sealed pack ensures the absence of metal contaminants as required by food safety guidelines, providing a final safety check after the product has left the open-tray environment where contamination risk is highest.